The Brainwave Synchronizer
Develop and Evolve Your Consciousness with Ease .....
The Brainwave Synchronizer is a Light and Sound device used to control brainwave frequencies and patterns, to achieve specific objectives. These objectives typically include;
The brainwave synchronizer works on the principle of entrainment, whereby the light and sound device creates an oscillating frequency which the brain starts to follow after a period of around 5-6 minutes. When the lights and sound from the synchronizer pulse at the speed of normal brainwaves when a session begins, they quickly synchronize. Your brainwaves will then follow as the light and sound stimulation shifts into the frequencies of another mind state. This is called the frequency following effect, or entrainment. The scientific term when lights are used for this is usually Photic Driving.
Each pulse of the stimulation being used must evoke enough of a response from the brain in order for entrainment to be effective. This response by the brain from sensory stimulation is called cortical evoked response. This can happen from any type of sensory stimulation, but the most effective means of doing this is through light and sound combined.
Brainwave Synchronizers typically use Light and Sound Delivered from a computer through Headphones and Special Light Glasses to achieve Control of Brainwaves
Sound has a very small effect on brainwaves when used alone, and shifting a mindstate effectively requires more than stimulation from sound at a sustained frequency.
The brainwave synchronizer uses complex pulse patterns of light and sound that years of research show are best for the brainwave frequency following effect.
To get a better understanding on how the brainwave synchronizer works, lets have a look at brainwave basics.
The Brainwave Synchronizer
The Brainwave Synchronizer is incredibly sturdy, conveniently small, ergonomic, and very easy to use. All you need to do is power it on, choose one of the 49 preset sessions, put on the headphones and lite frames, and close your eyes. The session will guide you into other mental states by stimulating your senses with special patterns of sound and synchronized lights. You will be instantly transported to a profound state of relaxation.
In your minds eye you'll see patterns of shapes dancing to thick washes and pulses of sound. These special combinations of flickering light and sound are having an effect on your brainwaves. Geometric patterns shape-shift and color cycle while guiding you through the session toward the mind state you desire.
Your stress from the day is released as your brainwaves begin following the frequencies you are perceiving. The frequencies used in the Brainwave Synchronizer sessions mimic those found in brainwaves during activities like meditation, dreaming, and deeply focused concentration. You experience and feel these states as your brainwaves synchronize to the lights and sound. Your brain begins producing more theta and alpha waves, and less beta waves - what we have during busy and scattered thinking throughout the day.
The Brainwave Synchronizer was designed for people who are looking for a powerful light and sound mind machine. Even with the low price, it is still packed with features. The Brainwave Synchronizer includes Audiostrobe technology for synchronizing special music CDs with the lights.
What is AudioStrobe?
A binaural beat is generated from two tones. Each tone is of a slightly different pitch. One tone is presented to the left ear, and the other to the right. The two tones combine into a single tone sensed by your brain. This single tone pulse is the stimulation when entraining with binaural beats.
Binaural beats are probably the most well-known stimulus used for entrainment. They have been shown to work, but some of the other audio entrainment techniques are more effective. The Brainwave Synchronizer produces binaural beats, dual binaural beats and other audio entrainment methods.
You can use the Brainwave Synchronizer as supplied with the 49 programs that it comes supplied with, but if you are really enthusiastic in exploring the complete scope of the brain synchronizer, you can use the session editor.
The Brainwave Synchronizer features a downloadable session editor which allows you to connect your Synchronizer to your computer, and create or edit your own sessions.
Nearly every aspect of the light/sound experience may be changed on a per-segment basis: pulse rates (0-50 Hz), the two color channels, which of four audio wave tables, whether the sound is modulated or binaural, etc. You can: import, edit and save your own versions of the 50 programs delivered with Brainwave Synchronizer; select, cut and paste groups of them to build large sessions quickly; organize and download them via the Session Manager; turn the LiteFrames and audio on and off, etc. And you have memory for more than 2,000 segments!
The Waveform Editor offers unprecedented flexibility in sound creation. Brainwave Synchronizer is the only light/sound system on the market today to offer such power. Each of the four waveforms stored in Brainwave Synchronizer consists of up to four harmonics, and each harmonic can be its own waveform. Mix sine, square, sawtooth and triangle waveforms, and our unique waveform cross-fading technology generates smooth, analog synth-like sweeps between waveforms at segment boundaries. No more "beep and bleep" audio experiences!
Download the Brainwave Synchronizer Editor software by clicking here. Full instructions on how to use the software are available by clicking here. To connect the Brainwave Synchronizer to your computer using your PC_Connect interface cable, you will need to download and run the device drivers after connecting to your computer by clicking here. The driver is compatible with XP/Vista/Windows 7, x86 or x64.
Is the Brainwave Synchronizer Safe for Everyone to Use?
No. If you plan to order the Brainwave Synchronizer, please make sure you are not sensitive to strobe effects. Make sure that you do not allow others who may be photo sensitive to use your machine.
Brainwave Synchronizers have been used for years - thousands of people have yielded their benefits. However, if you are sensitive to light or have PhotoSensitive Epilepsy, then the Brainwave Synchronizer is not for you. It is possible for a Brainwave Synchronizer to cause seizures in these individuals in the same way that oscillating lights or 'strobe' lights can. If you, or anyone else who shares your machine are using a pacemaker, suffering cardiac arrhythmia or other head disorders, on tranquilizers or psychotropic medicines, have epilepsy or visual photosensitivity, the Brainwave Synchronizer should be avoided.
A decade of experience developing and refining the use of light and sound technology has gone into the Brainwave Synchronizer. The proprietary preset sessions are the result of years of extensive research, in both universities and in the private sector. The preset sessions include programs created by Dr. Hans Bittner, based upon his research at the University of Essen. Sessions have been grouped into seven categories - Peak Performance, Relaxation, Learning, Well Being, Visualization, Sleep and PyroTechnics.
For complete details on each session, as well as graphics displaying the brainwave progression of each session, click here. The document is well worth printing and storing with your Brainwave Synchronizer.
Other Useful Resources for the Brainwave Synchronizer (for enthusiasts only!)
The Brainwave Synchronizer is very easy to use straight out of the box with the preset sessions shown above, but we have provided the following resources for those who have the time to investigate or explore the limits of this amazing device.
Note: Thoughtstream is a separate biofeedback system product that does not come supplied with the Brainwave Synchronizer. It can be purchased separately after you have set up and established the Brainwave Synchronizer.
Q: How long do the batteries last?
A: We recommend that you use alkaline batteries with the Brainwave Synchronizer for best results; under normal use you can expect approximately 50 hours continuous operation. You can also use rechargeable Ni-Cad "AA" batteries, which should last roughly 10-20 hours between recharges.
Q: What are the system requirements for the Brainwave Synchronizer Editor program?
A: Windows 98 or later is recommended (we've heard that this may be run under Windows 95, but have not certified it for so doing ourselves). You need less than 3 MB disc space; practically any system that runs W98+ should work well.
Q: How important is sound as a component of the light/sound experience?
A: It is especially important as a means for blocking external distractions, and pulsed audio waveforms can help reduce distracting thoughts via patterned stimuli. Binaural beat frequencies can induce brainwave activity at the beat frequencies in some cases, which further assists in accessing certain states of awareness. Generally speaking, the audio component is much less important than the visual, since a large part of our brain (about 40%) is involved with vision.
If you are using AudioStrobe or other forms of audio input, such as various forms of spoken word (affirmations, NLP, etc.) the importance of the audio increases in the overall experience.
Q: How does AudioStrobe work?
A: The AudioStrobe technique stores an inaudible control signal on digital media such as compact discs; these signals directly control the pulsing of the lights. Because the signals are mastered at the same time as the CD, very precise synchronization of the audio and visual stimulation can be achieved. AudioStrobe was developed by Mr. Andrzej Slawinski of AudioStrobe GMBH, Germany.
Q: Why didn't I receive a software disc?
A: We decided not to include the Brainwave Synchronizer software on the AudioStrobe sampler disc for two reasons: first, we could fit an extra bonus audio track on the CD that way, and more importantly we were making rapid progress on our new software revision and didn't want to make a lot of discs with obsolete software!
You can download the latest version of Brainwave Synchronizer software from here.
Q: I can't download sessions from my computer into Brainwave Synchronizer.
A: Check the following:
Remember that the Brainwave Synchronizer digital display will show rapidly changing numbers if it is receiving data.
Q: How do I update the Brainwave Synchronizer firmware (operating system)?
A: Follow these steps:
a. Launch Brainwave Synchronizer Editor and click the Update Code button on the top right hand side of the program window.
b. Notice that there are three checked boxes on the lower right, under send data to Brainwave Synchronizer in the above mentioned screen; in the future you can selectively upload new session data, code or user preferences separately. Leave them all checked for the moment.
c. Point your cursor to the Brainwave SynchronizerCODE30.pts (or whichever version is the latest.) file and left-click to highlight the filename.
d. Be sure your Brainwave Synchronizer is connected to your PC, and if necessary press the MODE (middle) button until the display reads DL (for download). Verify that the PC cable is plugged into the AUX input on the lower right side of Brainwave Synchronizer.
e. Now left-click the Upload Code button. You will see a display on screen indicating that the firmware update is downloading. The Brainwave Synchronizer display should also show rapidly changing numbers during the download; if this is not the case then either you have not selected the correct serial port, or the serial cable is not properly connected, or you are not in DL mode.
Q: Why are the LEDs in the GanzFrames red and green?
A: We chose these colors because they include a large range of evocable feeling-states, ranging from red (=energizing) to green (=relaxing) with a range of possibilities in between, especially amber, which is most efficient at evoking the peak performance state. Also, our testers reported that these colors produced the most vivid imagery.
Q: In what way is multicolored light superior to a single color?
A: Single-color stimulation does not take into account the differential effects of colored light stimulation on mood and EEG. Brainwave Synchronizer is the first system to provide real-time control over the brightness of both colors simultaneously, allow smooth shifts between the 250+ possible color combinations (16 shades each of red and green).
So a typical ramp from 16 Hz to 8 Hz might start all red, shifting to amber at 12 Hz and all green at 8 Hz. Or, you can try your own combinations to explore more unique effects.
Q: Why is the use of two frequencies simultaneously of value?
A: It is possible to elicit more complex states of consciousness by using more than one frequency simultaneously. In fact, most states of consciousness are not exemplified by a single frequency band. The Brainwave Synchronizer is the only machine available today which at least partially remedies that situation.
Q: What are the advantages of using biofeedback to control the Brainwave Synchronizer?
A: There are several reasons. First, the light frequency, brightness, color, etc. may be used to provide you with direct feedback regarding changes in your physiology associated with the use of light/sound stimulation--whether it be increased or decreased arousal, etc. Secondly, sessions may be created which alternate between light/sound stimulation and biofeedback; this was the approach taken with the Biolight study which led to significant improvement in college grade point average in those who used this system. Thirdly, the light/sound parameters may be "tuned" in real time to craft highly specific states of consciousness.
Q: Why are there multiple sensors listed in the Brainwave Synchronizer biofeedback settings?
A: We were originally preparing the system for the introduction of a low-cost, multichannel biofeedback system which would have more sensors. For various reasons this did not materialize. Only the EDR 1 setting is active with the ThoughtStream + Brainwave Synchronizer combination, although you can assign and scale this data to control any or all of six Brainwave Synchronizer parameters.
Q: Can I use Brainwave Synchronizer Editor with a Macintosh computer?
A: Although we have not tested Brainwave Synchronizer Editor with Windows emulation programs, we've heard that it does work with them. One customer recently wrote, "I found that running MS Virtual PC with Windows 98 on a Mac utilizing a Keyspan PDA USB adapter works just fine as far as I can see. The keyspan adapter can be used for both a Mac or a PC but should be configured for a Mac then within the VPC preferences just map one of the Comm ports to it. Its a little more problematical to configure it in the VPC as it sets up as comm port 3 which would not work smoothly."
Q: How do I connect the Brainwave Synchronizer to ThoughtStream?
A: Using the stereo audio patch cord which came with your Brainwave Synchronizer, connect the PC jack on top of the ThoughtStream to the AUX jack on your Brainwave Synchronizer. If you have selected a ThoughtStream-enabled program, the Brainwave Synchronizer will automatically sense the ThoughtStream and run it with biofeedback control.
See also the Brain Wave Tuning Forks
We accept payment through our
secure ordering system by:
|This web site is best viewed in 1024x768 screen resolution. Please send email to firstname.lastname@example.org with questions or comments about this web site. All content in this website is Copyright © 1997-2013 Cyberlab Systems Pty Ltd. All rights reserved. All prices in this web site are quoted in United States Currency ($US). All sales through Natures Energies are under the terms and conditions stated in our sales policy. Please consult the disclaimer page before purchasing any products from Natures Energies, or before accepting any of the information presented here. Web Development by Greg Hernon. Hosting by Ozelink. Last modified on 01 May 2013.|